Filter
Top Products
GEK-00029B 5000 Series Programmer’s Manual
203
SPECIAL CHARACTER PROCESSING
As mentioned in the introduction, four characters are considered
special characters. The processing for these characters is described
below.
Hex 20
If a 94-character graphic character set has been mapped into the GL
region, 20H always prints as a space character (SP). The justification
feature can modify how space characters are treated (See the JFY
command).
If a 96-character graphic character set has been mapped into the GL
region, then 20H causes the specified character from that set to be
printed. If 20H is undefined in that character set, the error character
is printed.
Hex 7F
If a 94-character graphic character set has been mapped into the GL
region, 7FH is always ignored.
If a 96-character graphic character set has been mapped into the GL
region, 7FH causes the specified character from that set to be
printed. If 7FH is undefined in that character set, the error character
is printed.
Hex A0
If a 94-character graphic character set is selected into GR, A0H
causes the error character to print.
If a 96-character graphic character set resides in GR, A0H prints the
specified character from that set. If A0H is undefined in that set, the
error character is printed.
Hex FF
If a 94-character graphic character set has been mapped into the GR
region, FFH is always ignored.
If a 96-character graphic character set has been mapped to GR, FFH
prints the specified character from that set. If FFH is undefined in
that set, the error character is printed.