ENWW 141
If no paper in tray:
MANUALLY FEED [TYPE]
[SIZE] For help press
V
alternates with
MANUALLY FEED [TYPE]
[SIZE] To use another
tray press
✔
A job sent requires a specific paper
type and size that is not currently
available.
1. Press
V for detailed
information.
2. Press
and to step
through instructions.
No job to cancel The C
ANCEL JOB button was pressed,
but there is no active job or buffered
data to cancel. This message is
displayed for approximately two
seconds before the printer is returned
to the
READY state.
No action necessary.
Moving. . .MP tray
solenoid To exit press
Cancel Job key
The printer is executing a Component
Test and the component selected is
MP Tray Feed Solenoid.
No action necessary.
Moving. . .tray feed
solenoid To exit press
Cancel Job key
The printer is executing a Component
Test and the component selected is
Tray Feed Solenoid.
No action necessary.
NON HP CARTRIDGE
DETECTED
A new cartridge has been installed
that is not made by HP. This message
is displayed until an HP cartridge is
installed or C
ANCEL JOB is pressed.
If you believe you
purchased an HP
cartridge, please call the
HP fraud hotline.
Any printer repair
required as a result of
using non-HP cartridges
is not covered under HP
warranty.
To continue printing,
press C
ANCEL JOB. The
first pending job will be
cancelled.
NON HP CARTRIDGE IN
USE
alternates with
Ready For menus press
✔
The printer has detected that a non-
HP print cartridge is currently
installed.
If you believe you
purchased an HP
cartridge, please call the
HP fraud hotline.
Any printer repair
required as a result of
using non-HP cartridges
is not covered under HP
warranty.
Message Description Action