Filter
Top Products
38 ENWW
To set supplies low reporting
1. Press ✔ to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press ✔ to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press ✔ to select SYSTEM SETUP.
6. Press to highlight SUPPLIES LOW.
7. Press ✔ to select SUPPLIES LOW.
8. Press or to select the appropriate setting.
9. Press ✔ to set the selection.
10. Press P
AUSE/RESUME.
Jam recovery
This option allows you to configure the printer response to paper
jams, including how it handles the pages involved. AUTO is the default
value.
z AUTO—the printer automatically turns jam recovery on when
sufficient memory is available.
z ON—The printer reprints any page involved in a paper jam.
Additional memory is allocated to store the last few pages
printed, and this may cause overall printer performance to suffer.
z OFF—The printer will not reprint any page that was involved in a
paper jam. Since no memory is used to store the most recent
pages, performance may be optimal.
To set jam recovery response
1. Press ✔ to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press ✔ to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press ✔ to select SYSTEM SETUP.
6. Press to highlight JAM RECOVERY.
7. Press ✔ to select JAM RECOVERY.
8. Press or to select the appropriate setting.