Filter
Top Products
ENWW 179
Unable to select the printer from the computer
Cause Solution
If you are using a switch box, the printer may
not be selected for the computer.
Select the correct printer through the switch
box.
The printer’s Ready indicator light is not lit.
Press
PAUSE/RESUME to return the printer to
the
READY state.
A printer message other than
READY appears
on the printer control panel.
See Control panel messages
.
The correct printer driver is not installed in the
computer.
Install the correct printer driver.
The correct printer and port are not selected
on the computer.
Select the correct printer and port.
The network is not configured properly for this
printer.
Use the network software to verify the printer’s
network configuration, or consult with the
network administrator.
The power source receptacle is not working
correctly.
Connect the printer to a different power
receptacle.