36 ENWW
Personality
This printer features automatic personality (printer language)
switching. AUTO is the default value.
z AUTO configures the printer to automatically detect the type of
print job and configure its personality to accommodate that job.
z PCL configures the printer to use Printer Control Language.
z PS configures the printer to use PostScript emulation.
To set the personality
1. Press ✔ to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press ✔ to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.
5. Press ✔ to select SYSTEM SETUP.
6. Press to highlight PERSONALITY.
7. Press ✔ to select PERSONALITY.
8. Press or to select the appropriate personality (AUTO, PCL,
PS).
9. Press ✔ to set the personality.
10. Press P
AUSE/RESUME.
Clearable warnings
You can determine the display time of control panel clearable
warnings with this option by selecting ON or JOB. The default value is
JOB.
z ON displays clearable warnings until you press ✔.
z JOB displays clearable warnings until the end of the job in which it
was generated.
To set the clearable warnings
1. Press ✔ to enter the MENUS.
2. Press to highlight CONFIGURE DEVICE.
3. Press ✔ to select CONFIGURE DEVICE.
4. Press to highlight SYSTEM SETUP.