Filter
Top Products
180 ENWW
Printer control panel problems
Control panel settings work incorrectly
Cause Solution
The printer control panel display is blank or is
not lit, even when the fan is running.
Fans may run while the printer is in standby
mode (off). Press the printer’s on/off button to
turn the printer on.
Printer settings in the printing software
application or printer driver differ from the
printer control panel settings.
Confirm that the settings in the application and
printer driver are appropriate, since the
application settings override the printer driver
and control panel settings, and the printer
driver settings override the control panel
settings.
Control panel settings were not correctly saved
after they were changed.
Reselect the control panel settings and then
press
✔. An asterisk (*) should appear to the
right of the setting.
The Data indicator light is lit, and there are no
pages printing.
Buffered data exists in the printer. Press
✔ to
print the buffered data using current control
panel settings and activate the new control
panel settings.
If the printer is on a network, another user may
have changed printer control panel settings.
Consult the network administrator to
coordinate changes to printer control panel
settings.
Unable to select Tray 3 (optional 500-sheet paper feeder)
Cause Solution
Tray 3 (500-sheet paper feeder) does not
appear as an input tray option on the
configuration page or on the control panel.
Tray 3 only displays as an option if it is
installed. Verify correct installation of Tray 3.
Tray 3 does not appear as an option in the
printer driver.
Verify that the printer driver configuration
recognizes Tray 3.