Filter
Top Products
24 ENWW
Paper handling menu
The Paper handling menu allows you to configure input trays by size
and type. This menu can also be used to set default media size and
type. It is important to correctly configure the trays with this menu
before you print for the first time.
Note If you have used previous HP LaserJet printers, you might be
accustomed to configuring Tray 1 to first mode or cassette mode. To
mimic the settings for first mode, configure Tray 1 for size = ANY and
type = ANY. To mimic the settings for cassette mode, set either the size
or type for tray 1 to a setting other than ANY.
Menu item Value Description
TRAY 1 SIZE A list of available sizes
appears.
Allows you to configure the media size
for Tray 1. The default is
ANY. See
Supported media weights and sizes
for
a complete list of available sizes.
TRAY 1 TYPE A list of available types
appears.
Allows you to configure the media type
for Tray 1. The default is
ANY. See
Supported media weights and sizes
for
a complete list of available types.
TRAY <N> SIZE
N = 2 or 3
A list of available sizes
appears.
Allows you to configure the media size
for Tray 2 or Tray 3. The default setting
is the size detected by the guides in
the tray. To use a custom size, move
the switch in the try to custom. See
Supported media weights and sizes
for
a complete list of available sizes.
TRAY <N> TYPE
N = 2 or 3
A list of available types
appears.
Allows you to configure the media type
for Tray 2 or Tray 3. The default is
PLAIN. See Supported media weights
and sizes for a complete list of
available types.