Filter
Top Products
ENWW 167
1 Using the side handles, open the
top cover.
2 Firmly lift the two green handles on
either side of the fuser to disengage
the fuser rollers.
3 Grasp the media by both corners
and pull to remove it.
Note If the media tears, make sure that
all media fragments are removed from
the paper path before resuming printing.
Do not reach into the fuser until it has
cooled.
4 Grasp the green handle on the
transfer unit and pull down. The
front cover will open as the transfer
unit is pulled down.
CAUTION Do not place anything on the
transfer unit while it is open. If the
transfer unit is punctured, print quality
problems may result.
5 Grasp the media by both corners
and pull down. If the media appears
to be crumpled in the fuser, go to
step six.
1
1
1
2
1
3
1
4
1
5