Filter
Top Products
152 ENWW
TRAY XX (TYPE) (SIZE)
Size specified by user
alternates with
TRAY XX (TYPE) (SIZE)
To change type press
✔
The printer is reporting the current
configuration of tray XX. The tray
switch is in the CUSTOM position.
1. To change media type,
press
✔. Use and
to highlight the type,
then press
✔ to select.
2. To change the media
size to Letter, A4,
Executive, B5 JIS, A5,
or Legal, set the tray
switch to the
STANDARD position
and adjust the media
guides to the correct
positions.
3. To change the media
size to other sizes, leave
the tray switch in the
CUSTOM position,
adjust the media guides
against the media, and
close the tray.
4. Select the paper
handling menu from the
control panel.
Configure the size for
the tray.
5. See Configuring input
trays for more details.
Unable to mopy job
<JOBNAME>
A Mopy job cannot be mopied
because of a memory, disk, or
configuration problem. Only one copy
will be produced.
No action necessary.
Unable to store job
<JOBNAME>
A job cannot be stored because of a
memory, disk, or configuration
problem.
Install additional memory
in the printer, or install a
disk drive into the printer.
If a disk drive is installed,
delete previously stored
print jobs.
USE INSTEAD? TRAY 2:
[TYPE] [SIZE] TRAY 3:
[TYPE]
The printer is offering a selection of
alternate media to use for the print
job.
Highlight the media with
and . Press ✔ to
select a choice.
Validating supplies
For menus press
✔
alternates with
Ready For menus press
✔
A new cartridge has been installed
and the printer is determining
whether it is an HP or non-HP
cartridge.
No action necessary.
Message Description Action