Filter
Top Products
56 ENWW
AppleTalk networks
Use the HP LaserJet Utility to set up the printer on an EtherTalk or
LocalTalk network. For more information, refer to the HP Jetdirect
Print Server Administrator’s Guide included with printers equipped
with the HP Jetdirect print server.
LocalTalk configuration
The LocalTalk interface enables you to print directly from a stand-
alone Apple Macintosh computer or from a Macintosh computer on a
LocalTalk network. For specific information on configuring the
computer and printer to print through a LocalTalk interface, refer to
the printer’s getting started guide and the HP Jetdirect Print Server
Administrator’s Guide.
Note For LocalTalk configuration, the DIN-8 printer cable must be connected
to the printer port of the Macintosh computer.
LocalTalk network configuration
To connect the printer to a Macintosh computer on a LocalTalk
network, use the HP LocalTalk Cable Kit. You will need a kit for each
printer and an additional kit for each Macintosh computer on the
network.
UNIX/Linux networks
Use the HP Jetdirect printer installer for UNIX utility to set up the
printer on HP-UX or Sun Solaris networks.
For setup and management on UNIX or Linux networks, use HP Web
Jetadmin.
To obtain HP software for UNIX/Linux networks, visit HP Customer
Care online at http://www.hp.com/support/net_printing.
For other
installation options supported by the HP Jetdirect print server, see the
HP Jetdirect Print Server Administrator’s Guide included with printers
equipped with the HP Jetdirect print server.