Filter
Top Products
Clearing the Left Door (Fuser Area)
1 Open the left door. If a mailbox accessory is installed, push it away
from the printer first to access the left door.
WARNING Avoid touching the adjacent fusing area. It may be HOT.
2 Remove any jammed or damaged paper from this area by pulling it in
the direction shown by the arrow (A) in Figure 7-5.
3 Lower the two green tabs and carefully check for additional pieces of
paper. Remove all scraps.
4 Close the door.
5 Push the mailbox back into place, if one is installed.
Left Door
A. Left door jam
B. Fuser area jam
Figure 7-7
7-30 Maintenance and Troubleshooting EN