Filter
Top Products
Changing Media Type and Size from the
Control Panel
1 Press [Menus] repeatedly until TRAY
MENU appears.
2 Press [Items] repeatedly to scroll
through the trays and their media
types.
Note
You must select the size of the media
before using Tray 1 or the optional
Envelope Feeder since they do not have a
sensor for identifying paper size . If either
is being used, you will also have a menu
item for media size.
3 Press [+] repeatedly to scroll through
the media type options.
4 Press [Select *] to choose the type of
media you loaded in the tray.
If you want to select the media for your
job by type, and not by the paper tray
(source), you will have to set the type
value for each tray on the printer control
panel, and in the printer driver. See
Chapter 3 for information on accessing the
printer driver.
Selecting media by type rather than source
is similar to locking out the tray(s). If you
have letterhead loaded in Tray 1, and you
select to print on plain paper in your
driver, the printer will not pull the
letterhead paper from Tray 1. However, it
will pull from one of the other trays if
plain paper is loaded, and has been set on
the printer control panel.
Items
Menus
+
Select *
5
Print Tasks
EN Print Tasks 5-21