Filter
Top Products
Verifying a PostScript SIMM
1 Plug in the power cord and turn the printer ON.
2 After a few seconds, the On Line light should go on and READY
should appear in the control panel display. If a printer message
appears instead, see the “Optional SIMM Board” section in Chapter 7.
3 Press [Menus] until POSTSCRIPT MENU appears. This indicates that
your printer recognizes that the PostScript language is installed. If
POSTSCRIPT MENU does not appear, check the SIMM installation.
Note Only a PostScript language SIMM designed for the HP LaserJet 5Si
series can be used.
C
SIMM
Installation
EN Memory and Personality SIMM Installation C-5