Filter
Top Products
Selecting the Left Output Bin
The Left Output Bin should be used for envelopes, transparencies, and
labels. Using this bin helps reduce paper curl.
Selecting the Left Output Bin through the Software
You can select an output bin through your software application or printer
driver, or from the printer control panel. Normally, we recommend
designating the paper destination in your software or printer driver, since
options set there override printer control panel settings. Follow the
instructions below for setting the Left Output Bin as the printer’s default
output bin through the printer control panel.
Note Where and how you make selections depends on your software
application or associated printer driver. In some environments, the
selection process may be available only from within the printer driver (if
the control panel has been locked by the network administrator, for
example.) See Chapter 3 or your application manual for more
information.
Selecting the Left Output Bin from the Control Panel
1 Press [Menus] repeatedly until CONFIGURATION MENU appears.
2 Press [Items] repeatedly until PAPER DESTINATION=TOP OUTPUT
BIN * appears.
3 Press [+] repeatedly until OPTIONAL OUTPUT BIN 1 or bin name
assigned to it by the Network Administrator appears.
4 Press [Select *] to save your choice. An asterisk (*) appears next to your
selection.
5
Print Tasks
EN Print Tasks 5-25