Filter
Top Products
Envelopes in Tray 1
You can print up to ten envelopes from Tray 1. This section explains
how to print an envelope using your software application. Table 5-1 lists
the kinds of envelopes you can print. Check the media use guidelines in
Table 5-2 before loading envelopes. (See “Media Use Guidelines”
earlier in this chapter.)
CAUTION Never use envelopes with clasps, snaps, windows, coated linings,
self-stick adhesives (peel and seal), or other synthetic materials. These
items can severely damage your printer. Never try to print on both sides
of an envelope. Jamming and printer damage can result. Do not staple
envelopes or send them to mailbox bins.
Before you load an envelope in Tray 1, check to make sure it is
rectangular in shape and undamaged. It is a good idea to run a pen or
pencil down the leading edge (side being fed into the printer) to flatten it
before you insert it in Tray 1.
A) Good Construction for Envelopes B) Poor Construction for Envelopes
Figure 5-2
5-16 Print Tasks EN