Filter
Top Products
LCS60 Software
Configure Default Route, DNS, and SNMP
Domain Name Server – dns
Use dns to define the Domain Name Server as shown in the example below.
Top>Config># dns
DOMAIN NAME SYSTEM (DNS) CONFIGURATION
1 Display Current Configuration
2 Modify/Create DNS Resolver Configuration
3 Enable/Disable DNS
Enter Menu Selection
[? for help, q to quit]
==> 2
Enter Domain Information [?, q]
==> ny.att.com
Enter Name Server [?, q]
==> 154.12.21.110
Enter Name Server [?, q]
==> 154.12.48.5
Enter Name Server [?, q]
==> q
DOMAIN NAME SYSTEM (DNS) CONFIGURATION
1 Display Current Configuration
2 Modify/Create DNS Resolver Configuration
3 Enable/Disable DNS
Enter Menu Selection
[? for help, q to quit, RETURN for menu]
==> 3
This system is configured with DNS DISABLED.
Enable DNS? [y, n] y
Your change "will only" become effective when you exit (i.e., quit)
from this menu.
Warning to administrator:
-------------------------
To ensure your subsequent TCP/IP commands will use DNS,
YOU SHOULD LOGOFF THEN RE-LOGIN AFTER EXITING lcsadm
Type RETURN to continue: Return
DOMAIN NAME SYSTEM (DNS) CONFIGURATION
1 Display Current Configuration
2 Modify/Create DNS Resolver Configuration
3 Enable/Disable DNS
Enter Menu Selection
Issue 3 3-25