Filter
Top Products
LCS60 Software
Configure Default Route, DNS, and SNMP
[? for help, q to quit]
==> q
Top>Config>#
Be sure to specify routed with the protocol command to start DNS service at
boot time.
SNMP Manager – snmp
Use the snmp command to define the SNMP manager as shown in the example
below.
Top>Config># snmp
SIMPLE NETWORK MANAGEMENT PROTOCOL (SNMP) CONFIGURATION
1 Display Current Configuration File
2 Modify/Create Configuration File
Enter Menu Selection
[? for help, q to quit, RETURN for menu]
==> 2
Enter Network Administrator’s Information [?, q]
==> my name
Enter Machine Location [?, q]
==> my location
Enter Community Name [?, d, q]
==> public
IP address of SNMP manager for community "public" [?, q]
==> 0.0.0.0
Access right for SNMP manager "0.0.0.0" [r, w, ?, q]
==> r
Adding the following information to the configuration file:
community public 0.0.0.0 read-only
Confirm? [y, n] y
Enter Community Name [?, d, q]
==> traps
3-26 Issue 3