HP (Hewlett-Packard) LCS60 Printer User Manual


 
Index
Index
service ports, 3-28, 7-3
SLIP information, 3-28
SNMP information, 3-26, 3-28
time, 3-28
Char mode, G-10
CIPX, 1-13
CIPX max slot (ipx), G-13
Class, G-13
Client
change a server to a, 8-35
change to a server, 8-33
define, 8-34
definition, 8-34
Client software
ARAP, F-2
PPP, F-2
SLIP, F-2
Commands
common, 8-4
path, 1-22
protocol and services, 3-9
UNIX, 1-21
CommKit Host Interface Software, 8-7
Common commands, 8-4
Compressed IPX header, (see CIPX)
Config, 8-5
Config directory, 3-28, 8-17
addnet/addhost, 8-17
backup, 8-18
commands, 8-16
console, 8-18
datetime, 8-17
delnet/delhost, 8-17
nodename, 8-18
softwarekey, 8-18
subnet, 8-18
upgrade, 8-21
viewhosts/viewnets, 8-21
Configuration, 3-1
AppleTalk network/zone, 4-10,
6-3
AppleTalk virtual network, 4-10,
6-3
ARAP, 6-1
changes, 3-28
dialogues, 2-24
ethernet interface, 4-11, 5-7
files, 8-28
gateway services, 3-10, 7-1
initial, 3-3
IP address, 5-4
IPX network, 4-7
LCS60, 2-29
Mac, F-1
network security group, 4-3, 5-3
PC, F-1
port, 2-9
PPP, 4-1
protocols, 3-10
requirements, 3-2
reserved IP addresses, 4-4
service ports, 7-3
SLIP, 5-1
SLIP information, 5-3
StarKeeper II NMS, B-1
system console, 2-9
TY, 2-14
Configuration commands, 3-28
StarKeeper II NMS, B-4
Connect time, G-10
Connection
console, 2-12
direct to LCS60, 2-12
fiber - error messages, 9-25
fiber - verify, 2-28
fiber cable, 2-19to2-20
Issue 2 I-3