Filter
Top Products
Maintenance
VMEDKHS Diagnostics
This task must be performed within 60 seconds!
Type yes To Continue, no To Stop Command:
CONTINUE TESTING [ yes, no: +(yes) ]: yes
90-08-18 13:47:57 NODE=NODENAME
M diagnose cpm 11 local_loop
DIAGNOSTIC EXITS
CC0> diag cpm 11
TEST TYPE [command_logic, module_reset,
local_loop, remote_loop]: remote_loop
Ask the host computer administrator to replace the fiber
optic link connection on the FIB paddle board with a loop-around connector.
This task must be performed within 60 seconds!
Type yes To Continue, no To Stop Command:
CONTINUE TESTING [ yes, no: +(yes) ]: yes
90-08-18 13:48:10 NODE=NODENAME
M diagnose cpm 11 remote_loop
DIAGNOSTIC EXITS
CC0> res cpm 11
CC0> display conn mod 11
Note: A message stating "UNIX Server Dead" may appear; ignore this message
and continue.
Restore the CPM-HS to service as shown in Screen 9-7 (res cpm #).
Verify that the CPM-HS is active as shown in Screen 9-7 (display
conn mod #).
4 . Restart the LCS60 software using the start dkhost command from the
lcsadm interface.
Issue 3 9-27