Filter
Top Products
PPP
LCS60 Configuration and Connection for PPP
Service
Figure 4-1 shows an example network using PPP service.
Note: PPP service using AppleTalk requires an R2.0 or R3.0 software key. IPX
service requires an R3.0 software key. Refer to Chapter 3 for information
about the software key.
Figure 4-1: Example Network – PPP Service
Lucent Data Switch
Mac
Modem Pool
LCS60
LAN
Mac
Novell File Server
Apple Printer
Workstation
Remote Access Clients
You can configure the LCS60 for PPP service using either the srvsetup command
or the individual commands (protocol, maxsessions, ipas, ipx, atalkas, etherif).
The examples in this chapter use the individual commands.
If previous configuration (for example, for SLIP service) was performed, some of
the steps required for configuring the LCS60 for PPP service may have already
been completed (e.g., etherif, ipas). Skip the steps that have been completed pre-
viously.
Issue 3 4-1