Filter
Top Products
Gateway
User Information
[ Type q to quit, ? for help, or press RETURN for default of "n" ]
Enter y,n ==> n
Enter Inactivity timeout minutes
[ Type q to QUIT, ? for HELP, or press RETURN for default of "n" ]
==> Return
*** NOTICE ***
Entering port < 2981 > to provide < socket > service as follows:
> Pre-Defined call address:
>
> watson
- TCP window size .................. 8192
- 8-bit character mode ............. Enabled
- Inactivity timeout(minutes) ...... Disabled
- Wait-for-Input timeout(minutes) .. 2
- NOHUP ............................ Disabled
- 2WAY ............................. Disabled
- SID .............................. Disabled
Enter this service port?
Enter y,n ==> y
*** Port < 2981 > has been added.
Press RETURN to continue ==>
Example UUCP Service Using SunOS 4.0
To use socket service to initiate a uucp connection to a data switch connected
host from a SunOS on the LAN, add the following line to the /etc/uucp/Systems
file on the Sun:
host_name Any TCP,g port 60name in: nuucp word: password
host_name is the host name of the data switch connected host. port is the port
number of the port configured in the LCS60 database to provide socket service
and 60name is the name of the LCS60 that is used as the TCP-to-Async gateway.
Note: The LAN host must be able to translate the symbolic name (60name) to a
TCP/IP address either through an entry in the /etc/hosts file or by access-
ing a DNS server.
nuucp is the login ID corresponding to the UUCP service on the data switch con-
nected host, and password is the login password for the nuucp login on the data
switch connected host.
7-16 Issue 3