Filter
Top Products
User Information
PPP Service Examples
Note: In the previous screen, Password is not used.
PPP Connection
After completing the client configuration procedures described above, establish
the PPP connection as follows:
Enter the connection dialstring in the Terminal Window as shown in the
example below. Be sure to enter F7 after entering the dialstring.
DESTINATION: mlkway/earth/morse.ppp
Note: Windows 95 can also use a customized dial-up script. Refer to the Win-
dows 95 on-line help for details on scripts.
WIN PC/TCP 3.0
Note: WIN PC/TCP 3.1 is different from 3.0. Refer to the user documentation
for specific details.
PC Configuration
Before you can make a PPP connection using PC/TCP, you must configure your
PC as follows:
Define a new session for the LCS60 server
Modify the existing dialup and hangup scripts.
Procedures for these tasks are given in the Using PC/TCP in Windows manual
provided with the PC/TCP software.
The dialup script initializes and dials the modem, handles login authentication
(such as login/password prompts from the NAC) and sends the LCS60 dialstring
in response to the Lucent Technologies data switch DESTINATION prompt. The
hangup script will terminate the PPP connection and hang up the modem. Tem-
plates for these scripts are supplied with the package; a sample is shown in
Screen F-2.
Issue 3 F-9