Filter
Top Products
ARAP
LCS60 Configuration and Connection for ARAP Service
Figure 6-2: Configuring ARAP Service
maxsessions
config protocol
atalk arap
configure client
side of ARAP
service
atalkas
obtain virtual
Datakit VCS
network name
start all
etherif*
srvsetup
* etherif is not required for
ARAP service, however, it
is required if other services
(such as PPP) are being
configured as well
1 . Obtain the AppleTalk network number and zone name for the virtual
network. The network number must be unique in the AppleTalk internet.
2 . Enter the lcsadm interface.
3 . Add the ARAP service:
Enter protocol from Config, or config protocol from the Top
directory.
Add atalk (as required).
Add arap.
4 . Define the ARAP service sessions (maxsessions):
Enter max from Config, or config maxsessions from the Top
directory.
Assign the number of ARAP sessions. (The total number of
sessions is 120 when ARAP is configured.)
6-2 Issue 3