Filter
Top Products
Administration
Backup and Restore Operations
Defining Backup/Restore Servers on a Client
Servers are defined from the Backup/Restore Menu, Screen 8-9. To define which
machines (servers) may back up a client, enter option 1 on the Backup/Restore
menu (Screen 8-9). This will display the menu shown in Screen 8-12.
Screen 8-12: Centralized Backup Server Definition Menu
CENTRALIZED BACKUP SERVER DEFINITION MENU
1. Enter/change a backup-restore server
2. Delete a backup-restore server
3. List backup-restore servers
4. Show machines backup-restore status: a client or a server
Enter Menu Selection
[ Type q to QUIT, ? for HELP, or ^ to GO BACK ]
==>
Choose option 1 to define a server. The system will prompt for the client name
and call address. It is essential when entering the call address of a server that the
originating group name of the server be identical to the data switch’s local
address of the server.
Servers cannot define other LCS60s to back them up, however, a server can
specify itself as its own client by means of the Centralized Backup/Restore Menu
– Server (Screen 8-11), by choosing option 1.
Changing a Client to a Server
In the case in which you are reconfiguring a client to be a server, you must first
delete all servers previously defined for the LCS60. Select option 2 on Screen 8-12
to delete the servers. This is required because a backup/restore server may not
define other servers. You can convert a client to a server only if any existing
server has been deleted. You can then add the server by selecting option 1 on
Screen 8-12.
Issue 3 8-33