Filter
Top Products
Error Messages
Outgoing Call Error Messages
Network hung up
The network hung up the call.
Network routing error
Due to a network configuration error, the call is being sent and received
over the same trunk.
No answer from dialed number
The call was dialed successfully but the autodialer did not get an answer.
No carrier tone was detected
The call was dialed successfully and answered; however, no carrier tone
was detected by the autodialer.
No diagnostic channel
The call could not be completed because a diagnostic channel is not avail-
able.
No initial dial tone detected
The autodialer on the called port may have a bad telephone line. The port
has been marked as bad and removed from the autodialer hunt group.
No response from autodialer. Try again
The autodialer on the called port failed to respond to the data switch node.
The port has been marked as bad and removed from the autodialer hunt
group.
No secondary dial tone detected
The autodialer was signaled to wait for a secondary dial tone in the dial-
ing sequence and no such dial tone was detected.
Open channel error
The call could not be completed because an error occurred opening the
channel.
Please supply a valid phone number
The user has neglected to type the phone number required to make a
phone call as in dkcu dialer-name.phone-number. The phone-number is
synonymous with the dialstring.
Issue 3 C-7