Filter
Top Products
SLIP
LCS60 Configuration and Connection for SLIP Service
DESTINATION:
area/exch/60name.slip..-uuserid
This specifies the full address of your LCS60 including the userid entered when
the address was reserved. For example, for a userid hartnell on the LCS60 morse:
DESTINATION: mlkway/earth/morse.slip..-uhartnell
To obtain a privately administered (static) address that has not been reserved by
the LCS60, use a dialstring similiar to the following:
DESTINATION: mlkway/earth/morse.slip..154.12.23.11
This specifies the full address of the LCS60 and a specific IP address. The IP
address specified in the above dialstring cannot be one of the IP addresses that
has been reserved for other users or is in use.
Dynamically Assigned IP Address
The LCS60 will assign a random IP address dynamically from the IP network
range associated with the called IP Network Security Group. To do so, the ses-
sion start up request must meet one of the following conditions:
The user has included the -D option on his/her data switch dialstring and
has a negotiable IP address administered in his/her client software pack-
age.
The -D option has been omitted from the dialstring and the user does not
have a reserved IP address administered in the LCS60 configuration data-
base.
For the user to always obtain a dynamic address from the PC, the dialstring is:
5-12 Issue 3