Filter
Top Products
Administration
lcsadm Interface
Name disable or enable
Synopsis disable port# [port#2 ...]
Description These commands are used with a port number to
temporarily disable a particular port from service or
temporarily enable a particular port. These commands
require root permission. More than one port number can
be specified on the command line.
Name flush
Synopsis flush [port# ...]
Description This command resets TCP service port statistics for the
individual ports. This command requires root permission.
Name show
Synopsis show [-c[v]][-w filename] [port#, ...]
Description The show command gives TCP service port statistics about
port state, service type, port resets. Output can be written
to a file (filename) using the -w option. Port statistics can be
shown individually by specifying a port number (port#).
The -c option displays configuration statistics including
service type, nohup, 2way, SID status, and PDDs. The -v
flag gives a verbose output.
Entering show without arguments will display statistics
for all ports.
Name summary
Synopsis summary
Description This command summarizes the service port information
including number of ports configured and in use.
Issue 3 8-11