Filter
Top Products
Gateway
LCS60 Configuration and Connection for Gateway Service
Note: The user should familiarize him/herself with all aspects of the LCS60
gateway service. For details, including a description of service ports,
refer to Chapter 1.
After configuring the LCS60 as described under Initial Setup in Chapter 3, per-
form the steps shown in Figure 7-2 to configure the LCS60 Gateway Services.
Figure 7-2: Gateway Services Configuration
maxsessions
srvports
start all
telnet
socket
directory
config protocol
tcpip
tcpasy
asytcp
etherif
srvsetup
1 . Enter the lcsadm interface.
2 . Add the gateway service:
From the Config directory, enter protocol, or enter config protocol
at the Top directory.
Add tcpip (as required).
Add tcpasy and/or asytcp as required.
3 . Define the Gateway service sessions (maxsessions):
7-2 Issue 3