Filter
Top Products
Appendix D
UNIX System Software Installation
Note: If you have not inserted the tape the following will be displayed.
Booting from: VM197, Controller 0, Drive 40
Loading: COREunix
Boot logic error
Packet status: 0000
Additional Error Status: 0002
7 . If you have a Fujitsu Drive, go to step 12.
8 . For the Seagate ST5660N drive only, continue with steps 9 through 11.
Set Display Options
The display options currently assume your terminal has:
24 lines
unknown cursor addressing
1) No change, proceed with installation or upgrade
2) Change the number of lines and return to this screen
3) Select vt100 cursor addressing
4) Select wyse50 cursor addressing
5) Select unknown cursor addressing
Enter option number of choice: [ 1-5 ] ( 1 ) 1
UNIX SYSTEM V/88 Release 4 Upgrade/Installation
You have the following options:
1) Full installation
2) Upgrade an existing R40V2 or later system
3) Exit without doing anything (reboot)
4) Enter maintenance mode
Enter option number of choice: [ 1-4 ] 4
•
•
•
Entering maintenance shell:
#
9 . For the Seagate ST5660N drive only: You are now able to edit scsifmt.info
by entering ed /etc/scsifmt.info at the # prompt above.
Issue 3 D-3