Filter
Top Products
SLIP
LCS60 Configuration and Connection for SLIP Service
-u Identifies the user (either user name or numeric ID) for whom
the IP address is requested. This is not required when a NAC is
used.
154.12.23.10 Specifies a privately administered IP address in dotted IP
address format. If this option is included on the dialstring, the
SLIP server will assign this address only if the address is:
Within the IP address range assigned to the LCS60, and
Not reserved for any user, and
Not currently in use.
If this option is not included on the dialstring, then the server
assigns either a dynamic or a reserved IP address to the connec-
tion.
Note: When a SLIP host is dialed (e.g., mlkway/earth/morse.slip), the LCS60
attaches the incoming call to the SLIP server. When the SLIP server is
ready to exchange IP datagrams, the server writes "SLIP
ipaddr=A.B.C.D" to the peer.
Privately Administered IP Address
In this case, the user’s IP address is locally administered by the user on his/her
PC software package. When calling into the LCS60 SLIP service, this requested
IP address is presented as part of the data switch dialstring. The LCS60 grants
the user’s request for the proposed IP address if the IP address is:
A valid IP address allocated from within the IP network range associated
with the IP network security group name that he/she has called. The IP
network security group name matches the local address component of the
LCS60’s data switch dialstring mnemonic address.
Not already in use by another user. The LCS60 may have already dynami-
cally assigned the requested IP address to another IP session.
Not a match to any reserved IP address that has been allocated by the
LCS60 administrator (except for a reserved IP address set aside for that
user’s user ID).
5-10 Issue 3