Filter
Top Products
EM78P259N/260N
8-Bit Microprocessor with OTP ROM
12 •
Product Specification (V1.2) 05.18.2007
(This specification is subject to change without further notice)
Bit 1 ~ Bit 0 (ADIS1 ~ADIS0): Analog Input Select
00 = ADIN0/P50
01 = ADIN1/P51
10 = ADIN2/P52
11 = ADIN3/P53
These bits can only be changed when the ADIF bit (see Section
6.1.14, RE (Interrupt Status 2 & Wake-up Control Register)) and the
ADRUN bit are both LOW.
6.1.10 RA (ADOC: ADC Offset Calibration Register)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
CALI SIGN VOF[2] VOF[1] VOF[0] “0” “0” “0”
Bit 7 (CALI): Calibration enable bit for ADC offset
0 = Calibration disable
1 = Calibration enable
Bit 6 (SIGN): Polarity bit of offset voltage
0 = Negative voltage
1 = Positive voltage
Bit 5 ~ Bit 3 (VOF[2] ~ VOF[0]): Offset voltage bits
VOF[2] VOF[1] VOF[0] EM78P259N/260N ICE259N
0 0 0 0LSB 0LSB
0 0 1 2LSB 1LSB
0 1 0 4LSB 2LSB
0 1 1 6LSB 3LSB
1 0 0 8LSB 4LSB
1 0 1 10LSB 5LSB
1 1 0 12LSB 6LSB
1 1 1 14LSB 7LSB
Bit 2 ~ Bit 0: Unimplemented, read as ‘0’
6.1.11 RB (ADDATA: Converted Value of ADC)
Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
AD11 AD10 AD9 AD8 AD7 AD6 AD5 AD4
When AD conversion is completed, the result is loaded into the ADDATA. The ADRUN
bit is cleared, and the ADIF (see Section 6.1.14, RE (Interrupt Status 2 & Wake-up
Control Register)) is set.
RB is read only.