Filter
Top Products
EM78P259N/260N
8-Bit Microprocessor with OTP ROM
Product Specification (V1.2) 05.18.2007
• 1
(This specification is subject to change without further notice)
1 General Description
The EM78P259N and EM78P260N are 8-bit microprocessors designed and developed with low-power and
high-speed CMOS technology. The series has an on-chip 2K×13-bit Electrical One Time Programmable
Read Only Memory (OTP-ROM). It provides a protection bit to prevent intrusion of user’s code. Three Code
option words are also available to meet user’s requirements.
With its enhanced OTP-ROM feature, the EM78P259N and EM78P260N provide a convenient way of
developing and verifying user’s programs. Moreover, this OTP device offers the advantages of easy and
effective program updates, using development and programming tools. User can avail of the ELAN Writer to
easily program his development code.
2 Features
CPU configuration
• 2K×13 bits on-chip ROM
• 80×8 bits on-chip registers (SRAM)
• 8-level stacks for subroutine nesting
• Less than 1.9 mA at 5V/4MHz
• Typically 15 μA, at 3V/32kHz
• Typically 1 μA, during Sleep mode
I/O port configuration
• 3 bidirectional I/O ports : P5, P6, P7
• 17 I/O pins
• Wake-up port : P5
• 8 Programmable pull-down I/O pins
• 8 programmable pull-high I/O pins
• 8 programmable open-drain I/O pins
• External interrupt : P60
Operating voltage range
• Operating voltage: 2.3V~5.5V (Commercial)
• Operating voltage: 2.5V~5.5V (Industrial)
Operating temperature range
• Operating temperature: 0
°
C ~70°C (Commercial)
• Operating temperature: -40
°
C ~85
°
C (Industrial)
Operating frequency range
• Crystal mode:
DC~20MHz/2clks @ 5V, DC~100ns inst. cycle @ 5V
DC~8MHz/2clks @ 3V, DC~250ns inst. cycle @ 3V
• ERC mode:
DC~16MHz/2clks @ 5V, DC~125ns inst. cycle @ 5V
DC~8MHz/2clks @ 3V, DC~250ns inst. cycle @ 3V
• IRC mode:
Oscillation mode : 4MHz, 8MHz, 1MHz, 455kHz
Drift Rate
Internal RC
Frequency
Temperature
(-40°C+85°C)
Voltage
(2.3V~5.5V)
Process Total
4MHz ±10% ±5% ±4% ±19%
8MHz ±10% ±6% ±4% ±20%
1MHz ±10% ±5% ±4% ±19%
455MHz ±10% ±5% ±4% ±19%
All these four main frequencies can be trimmed by
programming with four calibrated bits in the
ICE259N Simulator. OTP is auto trimmed by ELAN
Writer.
Peripheral configuration
• 8-bit real time clock/counter (TCC) with
selective signal sources, trigger edges, and
overflow interrupt
• 8-bit real time clock/counter (TCCA, TCCC) and
16-bit real time clock/counter (TCCB) with
selective signal sources, trigger edges, and
overflow interrupt
• 4-bit channel Analog-to-Digital Converter with
12-bit resolution in Vref mode
• Easily implemented IR (Infrared remote control)
application circuit
• One pair of comparators or OP
Six available interrupts:
• TCC, TCCA, TCCB, TCCC overflow interrupt
• Input-port status changed interrupt (wake-up
from sleep mode)
• External interrupt
• ADC completion interrupt
• Comparators status change interrupt
• IR/PWM interrupt
Special features
• Programmable free running watchdog timer
(4.5ms:18ms)
• Power saving Sleep mode
• Selectable Oscillation mode
• Power-on voltage detector (2.0V ± 0.1V)
Package type:
• 18-pin DIP 300mil : EM78P259NPS/NPJ
• 18-pin SOP 300mil : EM78P259NMS/NMJ
• 20-pin SOP 300mil : EM78P260NPS/NPJ
• 20-pin SOP 300mil : EM78P260NMS/NMJ
• 20-pin SSOP 209mil : EM78P260NKMS/NKMJ