Filter
Top Products
This window allows you to view the type-specific information associated with a PVL.
Field Descriptions
Server Name. The descriptive name of the PVL.
Total Volumes. The total number of volumes that have been imported into the PVL.
Total Repositories. The total number of PVRs in the Servers list window.
Total Drives. The total number of drives controlled by this PVL.
5.1.1.2. Physical Volume Repository (PVR) Information Windows
These windows allow you to view/update the type-specific information associated with a PVR.
Any changes made to fields on these windows are sent directly to the PVR and are effective immediately.
5.1.1.2.1. Operator PVR Information Window
Field Descriptions
Server Name. The descriptive name of the PVR.
Total Cartridges. The number of cartridges currently being managed by the PVR.
Cartridge Capacity. The total number of cartridge slots in the library dedicated to this HPSS PVR.
This may or may not be the total cartridge capacity of the library; a site might use part of the library for
some other HPSS PVR or for some non-HPSS application. The PVR uses the Cartridge Capacity field
and the Cartridge Alarm Threshold field to determine when to send an alarm that the total cartridge
threshold has been exceeded.
Cartridge Alarm Threshold. The percentage of the Cartridge Capacity at which the PVR will send an
alarm.
Dismount Delay. When Defer Dismounts is checked, this value is used by the PVL to determine the
number of minutes that dismounts are delayed after the last data access.
Shelf Tape Check-In Alarm. The PVR will periodically log alarm messages when a requested shelf tape
has not been checked-in. This field specifies the number of minutes between alarms. This field is only
active if the Support Shelf Tape checkbox is selected. The alarm value must be 2 or greater.
Shelf Tape Check-In Retry. The number of seconds the PVR will wait before asking the robot if a
requested shelf tape has been checked-in. The PVR will continue checking at this interval until the tape is
checked-in. This field applies only if the Support Shelf Tape checkbox is selected. The retry value must
be 30 or greater.
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 135