Filter
Top Products
• TRACE. If selected, Trace messages generated by the server are sent to the log. It is
recommended that this be OFF for all servers except the Mover. These messages give detailed
information about program flow and are generally of interest only to the server developer. In
normal operation, logging Trace messages can flood the log with very low level information. In
particular, it is important to avoid TRACE for the SSM System Manager Log Policy.
• STATUS. If selected, Status messages generated by the server are sent to the log.
Record Types for SSM. These log message types will be sent to the Alarms and Events window.
• SSM ALARM. If selected, Alarm messages generated by the server are sent to SSM. It is strongly
recommended that this always be ON.
• SSM EVENT. If selected, Event messages generated by the server are sent to SSM. It is
recommended that this always be ON.
• SSM STATUS. If selected, Status messages generated by the server are sent to SSM. It is
recommended that this always be ON.
Associated Button Descriptions
Use Default Log Policy. This button is used to configure the server to use the System Default Logging
Policy. The System Default Logging Policy is defined on the Global Configuration Window. Refer to
Section 4.1: Global Configuration Window on page 72.
If no server-specific log policy is defined for the server, the server uses the System Default Logging
Policy and this button is inactive. The values from the System Default Logging Policy are displayed in
this window.
To define a server-specific log policy, alter the fields in this window as desired and press the Add button.
A new log policy will be created for this server and the Use Default Log Policy button will become
active. The new log policy will also be added to the Logging Policies list window.
To remove the server-specific log policy, press the Use Default Log Policy button. The button will
become inactive again and the values of the System Default Logging Policy will be displayed in the
window. The server-specific log policy will be deleted from the system and from the Logging Policies
window.
To modify the server-specific log policy, alter the fields in this window as desired and press the Update
button.
5.1.1. Core Server Specific Configuration
A separate Core Server must be configured for each storage subsystem.
The Specific tab of the Core Server Configuration window allows you to view and update the type-
specific configuration for the Core Server.
HPSS Management Guide November 2009
Release 7.3 (Revision 1.0) 96