Aviso Leiaas instruções de instalação antes de ligar o sistema à sua fonte
de energia.
¡Atención! Ver las instrucciones de instalación antes de conectar el sistema
a la red de alimentación.
Varning!Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
Related
Documentation
General Safety Guidelines and Warnings for EX Series Switches on page 113•
• Laser and LED Safety Guidelines and Warnings for EX Series Switches on page 121
• Grounded Equipment Warning for EX Series Switches on page 134
• Connecting AC Power to an EX2200 Switch on page 73
• Connecting AC Power to an EX3200 Switch
• Connecting AC Power to an EX4200 Switch
• Connecting AC Power to an EX4500 Switch
• Connecting AC Power to an EX8200 Switch
• Connecting DC Power to an EX3200 Switch
• Connecting DC Power to an EX4200 Switch
• Connecting DC Power to an EX4500 Switch
• Connecting DC Power to an EX8200 Switch
• Connecting AC Power to an XRE200 External Routing Engine
• Connecting DC Power to an XRE200 External Routing Engine
Chassis Lifting Guidelines for EX2200 Switches
The weight of a fully loaded EX2200 switch chassis is approximately 10 lb (4.5 kg).
Observe the following guidelines for lifting and moving an EX2200 switch:
•
Beforeinstallingtheswitch,readtheguidelinesin“SitePreparationChecklistforEX2200
Switches” on page 33 to verify that the intended site meets the specified power,
environmental, and clearance requirements.
•
Before lifting or moving the switch, disconnect all external cables.
Related
Documentation
General Safety Guidelines and Warnings for EX Series Switches on page 113•
• Installation Instructions Warning for EX Series Switches on page 127
• Mounting an EX2200 Switch on page 53
Copyright ©2010,Juniper Networks,Inc.128
CompleteHardwareGuide forEX2200 EthernetSwitches