Filter
Top Products
Table 3: CLI Equivalents of Terms Used in Documentation for EX2200 Switches
Additional
Information
Itemin
DocumentationValue (CLI)Description (CLI)Hardware Item (CLI)
“ChassisPhysical
Specificationsfor
EX2200 Switches”on
page 5
Switchchassis–One of the following:
•
EX2200-24T-4G
•
EX2200-24P-4G
•
EX2200-48T-4G
•
EX2200-48P-4G
Chassis
Understanding
InterfaceNaming
Conventions on EX
SeriesSwitches
Theswitchdoes not
have actualFPCs. In
this case, FPCrefers to
the switch itself.
Value of n is always0.Abbreviatedname of
the FlexiblePIC
Concentrator (FPC)
One of the following:
•
EX2200-24T-4G
•
EX2200-24P-4G
•
EX2200-48T-4G
•
EX2200-48P-4G
FPC(n)
Understanding
InterfaceNaming
Conventions on EX
SeriesSwitches
Theswitchdoes not
have actualPIC
devices; see entries for
PIC 0 throughPIC 1 for
the equivalent itemon
the switch.
nisavalueintherange
of 0-1.
Abbreviatedname of
the Physical Interface
Card(PIC)
PIC (n)
“FrontPanelof an
EX2200 Switch”on
page 5
Built-innetworkports
on the frontpanel of
the switch
PIC 0One of the following:
•
24x10/100/1000
Base-T
•
48x 10/100/1000
Base-T
“FrontPanelof an
EX2200 Switch”on
page 5
Built-inuplink ports on
the frontpanel of the
switch
PIC 14x GE SFP
“OpticalInterface
Supportin EX2200
Switches”on page22
Opticaltransceiversnis a valueequivalent
tothe number of the
port in which the
transceiveris installed.
Abbreviatedname of
the transceiver
Xcvr(n)
“PowerSupplyin
EX2200 Switches”on
page 14
ACpowersupplyValue of n is always0.Built-inpowersupplyPowersupply(n)
“CoolingSystemand
Airflow in an EX2200
Switch”on page15
Fantray–FantrayFantray
Copyright ©2010,Juniper Networks,Inc.8
CompleteHardwareGuide forEX2200 EthernetSwitches