Filter
Top Products
Management Port LEDs in EX2200 Switches
Themanagementport onthe rear panelofan EX2200switchhastwoLEDs thatindicate
link/activity and port status (see Figure 7 on page 14).
Figure 7: LEDs on the Management Port on an EX2200 Switch
g027006
Link/Activity
LED
Status
LED
Table 7 on page 14 describes the Link/Activity LED.
Table 7: Link/Activity LED on the Management Port on an EX2200 Switch
Stateand DescriptionColorLED
•
Blinking—The port and the link areactive,and there is link
activity.
•
Onsteadily—Theport andthe link areactive,but thereis no
link activity.
•
Off—Theport is not active.
GreenLink/Activity
Table 8 on page 14 describes the Status LED.
Table 8: Status LED on the Management Port on an EX2200 Switch
Stateand DescriptionColorLED
Indicatesthe speed.The speedindicators are:
•
One blink per second—10Mbps
•
Two blinksper second—100 Mbps
GreenStatus
Related
Documentation
ConnectinganEXSeriesSwitchtoaNetworkforOut-of-BandManagementonpage74•
Power Supply in EX2200 Switches
The power supply in EX2200 switchesis built in along the rear panel of the chassis, with
an AC power cord inlet on the rear panel to connect power to the switch.
Copyright ©2010,Juniper Networks,Inc.14
CompleteHardwareGuide forEX2200 EthernetSwitches