CHAPTER 5
Mounting and Clearance Requirements
•
Rack Requirements for EX2200 Switches on page 39
•
Cabinet Requirements for EX2200 Switches on page 40
•
Requirements for Mounting an EX2200 Switch on a Desktop or Wall on page 42
•
Clearance Requirements for Airflow and Hardware Maintenance for EX2200
Switches on page 42
Rack Requirements for EX2200 Switches
You can mount the switch on two-post racks or four-post racks.
Rack requirements consist of:
•
Rack type
•
Mounting bracket hole spacing
•
Rack size and strength
•
Rack connection to the building structure
Table 18 on page 39 provides the rack requirements and specifications for the switch.
Table 18: Rack Requirements and Specifications for the Switch
GuidelinesRackRequirement
Use a two-post rackor a four-postrack. Youcan mount the switchon any two-postor four-post
rackthatprovidesbracket holesor holepatterns spacedat1 U (1.75in./4.45 cm) incrementsand
thatmeetsthe size and strengthrequirementstosupport the weight.
AUisthestandardrackunitdefinedinCabinets,Racks,Panels,andAssociatedEquipment(document
number EIA-310–D)published bythe Electronics Industry Association(http://www.eia.org).
Therackmust meet the strengthrequirementstosupport the weight of the chassis.
Racktype
Theholesin the mounting brackets arespacedat 1 U (1.75 in. or 4.45 cm), sothat the switchcan
be mountedin any rackthatprovidesholesspacedatthat distance.
Mounting brackethole
spacing
39Copyright©2010,Juniper Networks, Inc.