8
Performing an Internet Fax/IP Address FAX Operation
8-24 Scanner Mode
Specifying whether the destination name is inserted
➜ Touch [Set 1], and then
touch [Dest. Insert].
[Dest. Insert] is highlighted.
✎
Note
The destination name can
be inserted only if the
transmission source
information is added.
The destination name must have been registered as a one-touch key
in advance. Refer to “Registering as a One-Touch Key” on page 8-5.
Specifying the setting for the “TX Report” parameter
1 Touch [Set 1], and then
touch [TX Report].