Filter
Top Products
13
Specifying Management Settings
13-12 Scanner Mode
5 After performing the operation or specifying the setting for the function,
continue touching [Enter] to return to the Utility screen, and then touch
[Exit] to return to the standby screen (initial screen).
13.5 Specifying the Date and Time
Before using the copier, be sure to specify the date and time.
This is required in order to send e-mail messages at a specified time or to
record the correct time in reports.
Setting the date and time
1 Touch [Admin. 1], and then touch [Initial Settings].
❍ Refer to “Displaying the Administrator Management screen” on
page 13-11.
2 Touch [Date/Time Set].
3 Touch [TimeDate].