Filter
Top Products
Preparation
3
Scanner Mode 3-23
Frame Type Setting
1 In the Network Settings screen, touch [Frame Type Set].
2 Select the frame type
according to the Netware
environment that this copier
is connected to, and then
touch [Enter].
❍ Select a type from
“Auto”, “Ethernet-II”,
“802.2”, “802.3” or
“SNAP”.
These settings are
available when this
copier is connected to a Netware server and is used for PC print
functions.
Ping
Use this feature to check if the network is correctly connected.
1 In the Network Settings screen, touch [Ping].
2 Select the recipient where
the ping is to be sent, and
then press the [Start] key.
The message “Pinging”
appears.