Filter
Top Products
Specifying Management Settings
13
Scanner Mode 13-43
13.13 Specifying Software Switch Settings (Machine
Functions)
Various functions of this copier are already specified when it is purchased.
However, by using the software switch settings, the functions can be
changed to meet your specific needs.
Precautions
● Do not change any modes or bits other than those described in this
manual.
Software switch settings
● [Mode Selection]: Specify the three-digit number for the parameter
that you wish to specify with the software switch settings.
● [Bit Selection]: The bits are the eight numbers that construct the mode.
By specifying a binary number (0 or 1) for each of the bits (0 through
7), each function can be specified.
● [HEX Selection]: Specify a setting for each mode as a hexadecimal
number (0 through 9 and A through F).
For example, to specify the bit setting “00110000”, specify the
hexadecimal setting “30”.
Reference: Examples of [Bit Selection] binary numbers and [HEX
Selection] hexadecimal numbers
Decimal number
[Bit Selection] binary
numbers
[HEX Selection]
hexadecimal numbers
0 0000 0000 00
1 0000 0001 01
2 0000 0010 02
3 0000 0011 03
4 0000 0100 04
5 0000 0101 05
6 0000 0110 06
7 0000 0111 07
8 0000 1000 08
9 0000 1001 09
10 0000 1010 0A
11 0000 1011 0B
12 0000 1100 0C
13 0000 1101 0D