Filter
Top Products
Performing a Scan to PC (SMTP) Operation
9
Scanner Mode 9-1
9 Performing a Scan to PC (SMTP)
Operation
● If there is a DHCP server on the network, this function may not perform
correctly since IP addresses are automatically distributed to each
computer.
In this case, set a fixed IP address with the DHCP server or use IP
Scanner (refer to page 10-1).
● First, install IP Scanner onto the computer, and then start it up. →
Refer to page 10-21.
Refer to “Installing the Utilities” on page 3-29.
● The transmitted image is received with Image Receiver, then saved by
IP Scanner as an image file.
● When using IP Scanner, check that Image Receiver is running. Refer
to “IP Scanner” on page 10-1.
● The operations performed from the copier are described below. For
details on viewing the image file from the computer, refer to “Viewing
the scanned image (from the computer)” on page 10-25.
9.1 Basic Transmission
1 Position the document(s) to be scanned.
2 Press the [Fax/Scan] key.
❍ For a copier, press the [Scan] key.