Filter
Top Products
13
Specifying Management Settings
13-16 Scanner Mode
13.6 Specifying the Language of the Reports and the
Transmission Source Name
The language used for the TSI source name and for the reports can be
specified.
Specifying the setting
1 Touch [Admin. 1], and then touch [Initial Settings].
❍ Refer to “Displaying the Administrator Management screen” on
page 13-11.
2 Touch [Language (Com.)].
3 Select the desired language, and then touch [Enter].
4 Continue touching [Enter] to return to the Utility screen, and then touch
[Exit] to return to the standby screen (initial screen).