Filter
Top Products
13
Specifying Management Settings
13-48 Scanner Mode
13.13.3Specifying Settings Concerning Whether or Not There Is
a Connected Telephone or a Received Date Report and
Their Formats (Mode 016)
You can specify whether or not there is a connected telephone or a
received date report in the E-mail and fax modes, and you can specify
their formats.
Setting during production
Specifying the setting
During the production of this unit, the settings in the shaded cells were
selected. The numbers on the right side are page number with
descriptions for the corresponding function.
Bit 76543210
Setting 01000000(HEX:40)
Bit Function Setting Description
Page
referen
ce
7-
0 *Do not change these bits. -
6 Specifies whether or not a
connected telephone is
used.
0 Not used -
1 Used
5 Specifies whether or not a
received date report is
attached in E-mail mode.
0 Not attached -
1 Attached
4 Specifies whether the
received date report is
attached outside or inside
of the image in E-mail
mode.
0 Attached within the image -
1 Attached outside of the
image
3, 2 -
00 *Do not change these bits. -
1 Specifies whether or not a
received date report is
attached in Fax mode.
0 Not attached -
1 Attached
0 Specifies whether the
received date report is
attached outside or inside
of the image in fax mode.
0 Attached within the image -
1 Attached outside of the
image