Filter
Top Products
Preparation
3
Scanner Mode 3-5
* 1: If the “URL Report” function is used, the e-mail transmission (SMTP) settings must be
specified. (Refer to page 3-11.)
Copier domain name and registering with a DNS server
In order to perform Network Fax transmissions through a mail server, this
copier must be registered with a DNS server as a mail server.
<Sample settings>
If the settings are specified as shown in the above example, e-mail
addressed to “abcde.xyz.co.jp” will be received by this copier.
Operation
Scan to E-mail
Scan to
Server(FTP)
Scan to PC(FTP)
Scan to PC (SMTP)
Scan to HDD
IP Scanner
Internet Faxing
IP Address Faxing
Distribution of Fax
Documents
(fax reception)
Network FAX
Parameter
Devide
Setting
2 -----2 ---
File Destination Memory Input
File
Destination
Memory
Input
-
● --------
Ping
This function is used to check if the network connection (LAN connection) is correctly connected.
*The ping can be sent with an SMTP server or POP3 server specified. In addition, a ping can be sent with
any IP address specified.
Frame Type Setting
When connecting to the NetWare server and using the PC print function, specify the frame type.
Administrator mode in PageScope Light: [Network]>[FTP Server]>[FTP Configuration]
Proxy
server
address
- ▲ --------
Proxy port
number
- ▲ --------
FTP
Connection
Timeout
- ▲ --------
E-mail domain name xyz.co.jp
Copier IP address 192.168.100.200
Copier's self-registered domain name abcde.xyz.co.jp
DNS server setting for xyz.co.jp abcde.xyz.co.jp MX192.168.100.200