Filter
Top Products
Preparation
3
Scanner Mode 3-11
SMTP Settings screen
<Scan to E-mail settings and settings for sending Internet faxes (These
settings are also used for the e-mail notifications of the Scan to FTP and
Scan to HDD operations.)>
The following parameters can be set from the SMTP Settings screen.
1 In the Network Settings screen, touch [SMTP Settings].
2 Specify the necessary settings for the parameters in the page that
appeared.
3 Touch [Enter].
Parameter Description
SMTP Server
Address
Type in the IP address or host name for the
SMTP server.
*Both the host name and the IP address can be
typed in if the “DNS Setting” parameter is set to
“Yes”. If “No” is selected, only the IP address can
be typed in.
If necessary, change the port number of the
SMTP server.
E-mail Address Type in the e-mail address of this unit.