Filter
Top Products
3
Preparation
3-18 Scanner Mode
Registering an FTP site
<The following settings must be specified in order for the Scan to Server
(FTP) operation to be performed.>
1 In the Network Settings screen, touch [File Destination Memory Input].
2 Touch [Input], and then
touch where an FTP site
has not yet been registered.
❍ A maximum of five FTP
servers can be registered,
and a maximum of five
directories can be set up
on each FTP server.
✎
Tip
Touch [Check] to check or change the settings for a registered FTP
site or touch [Delete] to delete a registered FTP site, and then
touch the button for the FTP site.
3 Type in the name of the FTP
server, and then touch
[Next].