Filter
Top Products
Troubleshooting
15
Scanner Mode 15-5
Internet fax transmissions/Scan to E-mail transmissions
EF2508 An error other than those listed
above occurred with the SMTP
server.
Check that the SMTP server can
transmit.
-
EF2509 The memory has become full. Change the resolution to “Fine”
or “Standard”.
p. 4-18
Error
Code
Cause Remedy
Page
referen
ce
Error
Code
Cause Remedy
Page
referen
ce
E4DXXX Since the SMTP server address
is not specified, a connection to
the mail server cannot be
established.
Specify the SMTP server
address.
p. 3-3
E5AXXX Since the DNS setting is
incorrect, transmission is not
possible.
Check the DNS settings. p. 3-3
E5DXXX Since the e-mail address or e-
mail address of the recipient is
not specified correctly,
transmission is not possible.
Check the settings and the e-mail
address of the recipient.
p. 3-3,
p. 8-1
E6FXXX An attempt was made to send
data that is too large to be sent.
Even though scanning may have
finished, it may not be possible to
send some documents.
Change the resolution to “Fine”
or “Standard”.
p. 8-16
EAXXXX The LAN cable is not connected
or the transmission to the SMTP
server failed. Otherwise, an
attempt was made to send the
data to the wrong recipient
address.
Check that the LAN cable is
correctly connected, that
transmission is possible to the
SMTP server, that the network
settings, such as the subnet
mask, are correct, and that the
recipient's e-mail address is
correct.
p. 2-12,
p. 3-3,
p. 8-1
EABXXX Verification of POP3 before
SMTP failed.
Check the POP3 account and
password.
p. 3-3