Filter
Top Products
Troubleshooting
15
Scanner Mode 15-19
Others
The number of
digits in an
input or display
area and the
number of
characters that
can be
registered are
different.
Depending on the browser,
scroll within the input area. If
this is not possible, this should
not affect the actual setting
operation, although it may be
a problem for displaying.
--
Some
characters
cannot be
specified or
displayed.
Depending on the operating
system, some characters
cannot be specified or
displayed.
--
Space
characters
cannot be
specified or
displayed.
Spaces entered at the end of
words may be removed.
--
Entered data
was erased
when an error
occurred while
specifying
settings.
Depending on the browser,
settings that appear as “*”,
such as passwords, may be
erased.
--
Problem Cause Remedy
Page
referen
ce
Problem Cause Remedy
Page
referen
ce
Even though
the network
application is
installed,
[Network
Settings] does
not appear on
the
Administrator
Management
screen.
The device is not operating
correctly.
Contact your service
representative.
-
A fax cannot
be sent from
any screen.
The priority transmission
mode is set to sending e-mail.
To change the transmission
mode setting, touch [Admin.
Management] [Admin. 1] [TX
Settings] [Quality/Mode]
[Communication]. In addition,
if “E-mail” was selected for this
communication mode setting,
change it to “FAX”.
p. 13-21